BS EN 1021標準軟體家具易燃性評估

 Test item 測試名稱: Assessment of the ignitability of upholstered furniture 軟體家具易燃性評估Test info 測試內容：Nature of Ignition SourceIgnition SourceBS EN 1021-1Smouldering cigaretteBS EN 1021-2Match flame equivalentPr EN 1021-3 Protocol for assessment of the ignitability of upholstered furniture Ignition source equivalent to a burning 20 g paper cushion Coverings and upholstery materials Typical Sample 典型例子 Offices辦公室 Schools學校 Colleges專上學院Low HazardUniversities大學 Museums博物館 Exhibitions展覽場地 Day centres日間中心    Hotel bedrooms酒店房間 Public buildings公用樓宇 Restaurants餐館 Services' messes機構俱樂部Medium HazardPlaces of public entertainment公眾娛樂場所 Public halls公用會堂 Public houses and bars公用樓宇及酒吧 Casinos賭場 Hospitals醫院 Hostels旅館   High HazardSleeping accommodation in certain hospital wards and In certain hostels 某些醫院病房及某些旅館供人睡覺的地方 Offshore installations近岸設施   Very High HazardPrison cells  監獄囚室Lead time 測試周期: 常規 Regular service 7 working daysSample size 送樣規格: 1) 2 pcs Cover material and interliner for Smouldering cigarette test and  3 pcs Cover material and interliner for Match flame equivalent test, The cover size needed for each test shall be 800+10 mmX650+10 mm. where fabric interliner is used for each test, it shall be cut to the same dimensions, and in the same orientation as the cover, for fitting to the test rig under the cover.面罩和襯里，尺寸為800 mmX650 mm，香煙測試需要 2pcs，明火測試需要 3pcs2) Upholstery filling, 2 test assemblies (2 pcs for each size) are necessary for Smouldering cigarette test and 3 test assemblies (2 pcs for each size) are necessary for Match flame equivalent test, with the following dimensions: 450 x 300 x 75mm thick, and 450 x 150 x 75mm thick.填充材料，香煙測試需要2套試樣組合（1塊450 x 300 x 75mm + 450 x 150 x 75mm 為一套組合）, 明火測試需要3套試樣組合。
For Pr EN 1021-3 : ① Cover Fabric or interliner: Two piece of cover and interliner(if appropriate) respectively in the size of 650 x 1100mm.  ② Filling: Two block of filling with 450X450X75mm thick and Two block of filling with 450 x 300 x 75mm thick.Others 其他信息：1) In France, public seating is mandatory for the fire safety according to “Article AM 18”. The test method is based on Pr EN 1021-3 (NF D 60-013).     Sample for reference 參考圖片:>Sample Report 報告樣本：